DROP-SAW BENCH - INSTRUCTIONS

◆ Fold out both legs of the Saw Bench into the fully open position.

◆ Saw Bench must be positioned on a flat level surface.

◆ Fit Platform.

◆ Place the Drop-Saw on top of the aluminium Platform.

◆ Adjust the height of the Platform by turning the four Nylock nuts provided so as the saw table is level with the channel top.

◆ Align the fence of the saw with the outer edge of the 150mm wide saw bench channel top by using a straight edge.

◆ Drill at least 2 x 10mm holes through the base of the Drop-Saw and through the aluminium Platform.

◆ To bolt the Drop-Saw down, use at least 2 x 10mm hex bolts with Nylock nuts and tighten.

◆ To secure the Platform to the Bench use one wing nut on each of the four height adjusting rods.

◆ To fit extension, lift to 450.

Are you a factory or trading company?

Shanghai Ruiju is a professional manufacturer of aluminium ladder, fiberglass ladder, aluminium work platform, aluminium scaffolding, aluminium trolley and other aluminium products custom.

Do you provide OEM/ODM service?

Yes, we do. Almost all of our products are made according to our clients' designs. We offer OEM/ODM service for 20 years.

How can I get samples?

Please contact us by Email(jenny.liu@ruiju.com/ben.cai@ruiju.com) and tell us your requirements.

Whats is the MOQ?

Normally a full container load, LCL is also accepted if customers agrees standard package.

How to control quality?

We have IQC (Incoming Quality Control), IPQC ( Input Process Quality Control), QC full inspection before packing and OQC before shipment.